TTS TEMPO - Page 7

Selection
Validation
Selection
Validation
▼
▲
■ Select the redlight timing with the + and -
(select) user-defined keys.
■ Validate.
Red light programming
5s
10s
15s
…
60s
Selection
Validation
STEP 3
Traffic light 1 green light
programming
■ Select the green light timing (flashing
orange) of the 1
st
traffic light with the + and -
(select) user-defined keys.
■ Validate.
▼
▲
5s
10s
15s
…
60s
Selection
Validation
STEP 4
Traffic light 2 green light
programming
■ Select the green light timing (flashing
orange) of the 2
nd
traffic light with the + and -
(select) user-defined keys.
■ Validate.
You must hear a double BEEP.
▼
▲
5s
10s
15s
…
60s
Validation
STEP 5
Repeat this operation for the third light.
Validation of the cycle on traffic lights 2 and 3
Traffic
light 1
Traffic
light 2
Traffic
light 3
Mode selection
STEP 1
STEP 2
LIGHT: 12,0V
FLASHING M
CYCLE:
CROSSROAD 3T
CROSSROAD 3T
RED:25s
CROSSROAD 3T
GREEN 1:10s
CROSSROAD 3T
GREEN 2:15s
CROSSROAD 12,0V
3T GREEN:25s P1m
CROSSROAD 12,0V
3T GREEN:25s P2a
CROSSROAD 12,0V
3T GREEN:25s P3a
Repeat this step for the light n°3.
Each light turns green one after the other
Axe 1
Axe 2
Traffic
light 3
Traffic
light 1
Traffic
light 2
3 LIGHTS ALTERNATE CROSSROAD PROGRAMMING
7
■ Select « Crossroad 3T » mode with the +
and - (mode) user-defined keys.
■ Validate.
■ Switch on the remote control
■ Direct it to the window display symbol
■ Go to the 2nd traffic light
■ Direct the remote control to the window
display symbol
■ Validate.
You must hear a double BEEP.