Tuff Stuff ALPHA Rooftop Tent Manual
WARNING:
Your vehicle MUST have a roof rack or cross bars installed in order to mount this tent.
The cross bars MUST have a dynamic weight load of at least 165Lbs and MUST be at least
30” apart.
CONTENTS INCLUDE:
• One Hard shell tent with the ladder installed
• Two mounting Rails (including four M6*40mm bolts and four self-locking nuts)
• One tool kit (contains one 13mm spanner, one 10mm spanner, four U-Shaped
mounting brackets, eight M8*35mm square-head bolts and eight self-locking nuts)
• One storage bag
• One shoe bag
• One wind-resistant bag
• Two tension rods (One tension rod carrying bag)
INSTALLATION
The tent is designed to open on the passenger side of the vehicle ONLY.
1、 Using 2-4 people, lift the tent on to the cross bars of your vehicle and center the tent
2、 Insert two square-head bolts into the rail under the tent according to the width of your
cross bars.
To Next Page
Loading...