IG. 57 Next, route the Leg Extension Cable (#15) through
he Offset Pulley Bracket (#23), as shown above. Refer to
ig. I on page 17 for further detailed illustration of this cable
outing.
FIG. 58 Finally, route the remainder of the Leg Extension
Cable (#15) through the Nylon Pulley 4 1/2 Rd. (#35) located
on the Rear Upright (#4). Then, assemble the Strap Bracket
(#83) and the Abdominal Strap (#53) onto the cable-end of th
Leg Extension Cable (#15). Secure this assembly using one
Shoulder Bolt 3/8 X 3/4 (#80), one Nylon Ball 1 3/4 X 5/16
(#85) and one Nylon Insert Lock Nut 5/16-18 (#84). Refer to
Fig. D on page 18 for further detailed illustration of this
assembly.
IG. 59 Insert the end of the Low Row Cable (#17) into the
ow Row Swivel Pulley Bracket (#40) and secure it into
lace using one Nylon Pulley 4 1/2 Rd. (#35). Use the pulley
ounting hardware described in Fig. 55 on page 15 to fasten
he pulley and cable into place.
FIG. 60 Insert a Nylon Pulley 4 1/2 Rd. (#35) and the Lo
Row Cable (#17), as shown above. Use the pulley mounting
hardware described in Fig. 55 on page 15 to fasten the pulley
into place.
Owners’ Manual: Assembly Instructions
SL-IV Muscle IV Home Gym
16
To Next Page
Loading...
