Tufner T900 Series User Manual

8
Counting Function
● The counting function is used to count a high volume of identical parts. You can do
this by setting a sample and then either adding to the sample or taking away from
the sample to count the number of objects on the scale
● In weighing mode: Put a sample weight on the scale (Sample options are 5, 10, 20,
50, 100, 200, 500)
● Then press the COUNT key to go to the counting mode (“pcs” will light up)
● It will then display the sample number (ex.
PCS 0
) which you can change using
the up or down arrows
● Press the PRINT key to conrm your sample number
● The scale is now ready to start counting, load your product on the scale and the
indicator will show the quantity
● To exit counting mode press the COUNT key
● If you want to count a different product hold the PRINT and COUNT key together
and the sample pieces will reset back to zero
Accumulation
● The accumulation function is used to add multiple weights and total them together
● In weighing mode load the rst weight, once stable press the ACCUM key to enter
the accumulation mode. The “total” indicator/light will display
● The screen will show “
n001
” to indicate the rst weight has been saved
● Remove the rst weight and press the ZERO key to stabilize the scale
● Add the second weight to the scale
● Once stable press the ACCUM key to add the weight to the accumulated total
● The screen will show “
n002
” to indicate the second weight has been saved
● Repeat previous steps until all desired weights have been added to the total
(you can accumulate up to 999 different weights)
● When you are done and want to display the accumulated total, press the ACCUM
and PRINT key together. The accumulated number “
n002
” (the number of weights
you are adding together) will ash on the display followed by the total
● The total will display by ashing between 2 sets of numbers
● There are 8 digits in total, the display will ash 4 at a time, the rst 4 on the left and
the last 4 on the right. For example if the rst 4 digits are “0012” and the last 4 digits
are “3456” the actual weight is 001234.56 or 1234.56 lbs/kg
● If you want to print the accumulated total, hold the PRINT key for one second while
the last 4 digits of the total are shown
● To exit accumulation mode, wait for the last 4 digits to the right of the screen to
appear, and then press and hold the ACCUM key for one second
● “
CLr n
” will be displayed, asking you if you want to keep the data?
● If NO you do not want to clear the accumulated total, then keep “
CLr n
”.
● If YES you do want to clear the total, then use the arrow key to change to “
CLr y
”
● Finally, press the PRINT key to select exit accumulation mode

Tufner T900 Series Specifications

General

Brand	Tufner
Model	T900 Series
Category	Measuring Instruments
Language	English