Need help?Do you have a question about the Tuft & Needle Wood Frame and is the answer not in the manual?
General| Material | Wood |
|---|---|
| Style | Modern |
| Assembly | Required |
| Frame Material | Solid Wood |
| Wood Type | Pine |
| Finish | Natural |
| Weight Capacity | 500 lbs |
Guidance on cleaning, moisture, heat, and sunlight exposure for the wood frame.
Information on the 100-night trial, limited warranty, and reporting damaged items.
Advice on needing a second person for safe and easier assembly.
Lists all components and hardware required for assembling the wood bed frame.
Steps 1 & 2: Arrange parts, insert threaded rods into headboard/footboard, and hand-tighten.
Steps 3-5: Thread nuts loosely, attach siderails to footboard, insert washers, and tighten nuts.
Steps 6-9: Attach siderails to headboard, insert washers, tighten nuts, attach center beam, and adjust feet.
Steps 10-12: Lay and secure slats to side rails, completing bed frame assembly.
To Next Page
