Tuft & Needle Metal Base User Manual

Metal Base
ASSEMBLY INSTRUCTIONS

Tuft & Needle Metal Base Specifications

General

Material	Metal
Style	Modern
Color	Black
Warranty	3-year limited warranty
Weight Capacity	500 lbs
Assembly	Easy assembly, no tools required
Compatibility	Compatible with most mattresses

Summary

Parts Identification

Parts for Twin and Twin XL Sizes

Lists all components included for assembling the Twin and Twin XL bed base.

Parts for Full, Queen, King, and Cal King Sizes

Lists all components included for assembling the Full, Queen, King, and Cal King bed base.

Assembly for Twin and Twin XL

Step 1: Extend Frame Pieces

Extend frame pieces A and B fully, noting the frame is assembled upside-down.

Step 2: Connect Cross Supports

Place C and D pieces with A and B, aligning all holes for connection.

Step 3: Install Support Legs

Tightly screw the support legs (F) through every designated hole using fasteners (E).

Step 4: Final Base Adjustment

Flip the assembled base over and adjust the legs as needed for stability.

Assembly for Full, Queen, King, and Cal King

Step 1: Extend Frame Pieces

Extend frame pieces A and B fully, noting the frame is assembled upside-down.

Step 2: Connect Cross Supports

Place E and F pieces with C and D, aligning holes with A and B frame sections.

Step 3: Install Support Legs

Tightly screw the support legs (H) through every designated hole using fasteners (G).

Step 4: Final Base Adjustment

Flip the assembled base over and adjust the legs as needed for stability.