11
Technical features
EL7_ST
EL7_PLC
• Power supply: 230V (other voltages on request) +/- 20% - 50/60Hz
• Max. consumption: 1.5 W
• Max. current to vibrator: 6.3A RMS (8A by request)
• Minimum load: 50mA RMS
• Fuses: 6.3A F 250V 5x20 H 1500A
• Adjusting potentiometer: 100Kohm linear
• Vibration frequency: 3000/6000 vibration per minute
• Ramp time: 0.1sec. or 1sec. (selectable)
• Min. setting: 80V +/- 30%
• Max. setting: 200V - 30%
• ON/OFF input: clean contact 0 - 30VDC
• Automatic input consumption: 1mA max with 0 -10V
• Input impedance 0-10V: 50Komh / 0-20mA: 50ohm
• Protection grade: IP00
• Assembly position: horizontal or vertical.
• Storage temperature: -10 °C to + 80 °C
• Operating temperature: 0 °C to + 45 °C
• Relative humidity range: 80% to 31°C
• Installation category: II
• European standards: EMC-CE
To Next Page
Loading...
Need help?
General
