STEP 7— Once the Boundex frame is completely set up, lay one of the small layers of Lycra on top on the
yellow bed and align the bungees at the four corners.
STEP 8— Pull string through opening of the two support bars.
STEP 8 (A)— Stretch the string outward to go around both D2 knobs.
Any questions or problems, please call Tumbl Trak at (800) 331-4362
STEP 5— Insert the remaining upright legs into the D2 knobs at each
corner of the Boundex.
Step 5
STEP 6— Once you get to the last corner, you will have to stretch the Lycra and pull the last two ends of the
support bars into the D2 knobs. Make sure all ends are ghtened.
Step 6
Step 7
Step 8 Step 8 (A)
To Next Page
Loading...
