Tumbl Trak Boundex User Manual

Assembly Instructions
Boundex
Parts:
A. (4) Foam covered support bars
B. (4) Upright legs with D2 knobs
C. (1) Yellow Lycra bed
D. (2) Small top layers of Lycra with
bungee corners
E. (1) Blue Lycra skirt
F. (1) Not pictured: Drawstring carrying bag
Parts List
A. A.
B.
C.
D.
E.
Any questions or problems, please call Tumbl Trak at (800) 331-4362
Thank you for investing in the
Tumbl Trak Boundex. After
opening the boxes, please check
the parts list to make sure all
pieces have arrived in good
condition. If you have any
questions during the
assembly process, please call
customer service at
1-800-331-4362.
General Lycra Care Tips
• Hand or machine wash in lukewarm water on
gentle cycle using mild detergent
• Do not use chlorine bleach on any fabric containing
Lycra
• Rinse thoroughly
• Drip dry. If machine dried, use low temperature
• Do not iron

Tumbl Trak Boundex Specifications

General

Brand	Tumbl Trak
Model	Boundex
Category	Sports & Outdoors
Language	English

Summary

Parts List

Safety Instructions

General Lycra Care Tips

Assembly Process

Prepare the Lycra Bed

Lay the yellow Lycra bed flat and identify the four corner openings.

Insert Support Bars

Feed foam covered support bars through Lycra sleeves to form the frame.

Attach Upright Legs

Connect upright legs to support bar ends, ensuring D2 knobs align and lock.

Secure Leg Connections

Stretch Lycra and pull the last ends into D2 knobs, ensuring all connections are tight.

Add Top Lycra Layers

Place small Lycra layers on the frame and align bungees at the corners.

Attach Lycra Skirt

Align the skirt corners with the frame and stretch over knobs to cover legs.