Tumbl Trak Jr. Bar Pro User Manual

Parts ListParts List
Assembly InstructionsAssembly Instructions
Thank you for
purchasing the Jr. Bar
Pro. We hope you will
enjoy years of use of
this product.
After opening the
boxes, please check the
parts list to make sure
all pieces have arrived
in good condition. If
you have any questions
during this assembly
process, please call
customer service
at 1-800-331-4362.
Jr. Bar ProJr. Bar Pro
Parts List:
(1) kip bar subassembly
(2) vertical supports
(1) center-beam
(2) side legs
(2) spring-detent knobs (D-2)
(4) hand-knobs (D-1)
(1) 6mm allen wrench
(4) button-head cap screws
(4) lock washers
(4) flat washers

Tumbl Trak Jr. Bar Pro Specifications

General

Brand	Tumbl Trak
Model	Jr. Bar Pro
Category	Accessories
Language	English

Summary

Parts List

Safety Instructions

Assembly Process

Step 1: Attach vertical supports to center-beam

Connect vertical supports to the central beam using provided hardware and fasteners.

Step 2: Attach side-legs to vertical supports

Secure the side legs to the vertical supports to form the base structure.

Step 3: Insert kip-bar into vertical supports

Slide the kip bar assembly into the designated holes on the vertical supports.

Step 4: Align tube holes and insert spring-knobs

Align the kip bar's tube holes and insert spring-knobs to secure the bar's position.

Adjustment and Guidelines

Adjust Kip Bar Height

Procedure to loosen, reposition, and tighten the spring-knob for height adjustment.

General Guidelines

Provides a weight limit and notes on recommended usage for the equipment.

Accessories for the Jr. Bar Pro