Tumbl Trak Jr. Kip Bar User Manual

Assembly Instructions
Assembly Instructions
Thank you for
purchasing the Jr. Kip
Bar. We hope you will
enjoy years of use of
this product.
After opening the
boxes, please check
the parts list to make
sure all pieces have
arrived in good
condition. If you have
any questions during
this assembly process,
please call
customer service
at 1-800-331-4362.
Parts List
Parts List
2 - Uprights
1 - Center Cross
Support
2 - End Cross Supports
Hardware Includes:
(2) D-2 Knobs
(1) Allen Wrench
(12) Set Screws
Jr. Kip Bar
Jr. Kip Bar
1 - Bar Assembly
Troubleshooting tip:
Spray WD-40 on the
metal uprights for
ease of sliding the
bar up and down.
NOTE: Tumbl Trak equipment is not recommended for
the use in Parkour/Free Running related activities.
Available
in Red or
Purple

Tumbl Trak Jr. Kip Bar Specifications

General

Brand	Tumbl Trak
Model	Jr. Kip Bar
Category	Fitness Equipment
Language	English

Summary

Jr. Kip Bar Assembly Instructions

Safety Instructions

Essential safety rules, warnings, and precautions for safe use of the equipment.

Parts and Hardware Overview

Lists components and hardware included for assembly, along with a troubleshooting tip.

Step-by-Step Assembly Guide

Assembly Steps

Detailed, numbered instructions for assembling the Jr. Kip Bar with visual references.

Adjusting Bar Height

Procedure for loosening, adjusting, and tightening the bar height using knobs.

General Weight Guidelines

Recommendations for athlete weight limits based on base configuration and skill level.

Optional Accessories for Jr. Kip Bar

Base Extensions

Accessory for increased stability for higher level skills or heavier athletes.

4'x8' Plywood

Optional board to secure the base, preventing rocking with heavier athletes.

4'x8' Tumbling Mat

Provides a softer base for skills and can be used for tumbling.

Jr. Practice Mat

A foldable mat with handles for easier transport and safe landings.