Tumbl Trak Addie Beam

Need help?

Do you have a question about the Tumbl Trak Addie Beam and is the answer not in the manual?

Summary

Addie Beam

Parts List

Lists all components required for assembly, including beam, feet, screws, washers, and wrench.

Safety Instructions

Provides crucial safety guidelines, warnings about serious injury, and proper usage protocols for the equipment.

Recommended Accessories

Hopscotch Mat

A multi-use mat for FUN, spanning the beam's length, with hopscotch squares and a white line for beam skills.

Tumbling Mat

A mat that spans the beam's length and provides a softer surface underneath.

The Tumbl Trak Addie Beam is a piece of gymnastics training equipment designed to help users practice and refine various acrobatic skills, including leaps, turns, handstands, and more, in a safe and controlled environment. It is intended for use by individuals who are learning or improving their gymnastics abilities.

Function Description:

The primary function of the Addie Beam is to provide a stable, elevated, and narrow surface that simulates a traditional gymnastics balance beam, but with features that make it more accessible and safer for training. The beam allows users to develop balance, coordination, strength, and precision required for beam routines. Its design encourages progressive learning, enabling users to master fundamental skills before advancing to more complex maneuvers. The suede-covered surface offers a comfortable and non-slip grip, enhancing user confidence during practice.

Usage Features:

Progressive Learning: The Addie Beam supports a progressive learning pattern. Users are encouraged to achieve basic skills before attempting more advanced ones. This approach helps build a strong foundation and reduces the risk of injury.
Supervised Use: For optimal safety, the equipment should always be used under the supervision of trained and qualified instructors. This ensures that users receive proper guidance, technique correction, and immediate assistance if needed.
Spotting Equipment: The use of trained spotters and appropriate spotting equipment is highly recommended. Spotters can provide physical support and intervention to prevent falls and injuries, especially when practicing new or challenging skills.
Pre-Use Checks: Before each use, it is crucial to check the equipment for proper positioning. The manual explicitly states that "equipment can move during use," highlighting the importance of ensuring the beam's stability and correct setup to prevent accidents.
Protected Surfaces: To further enhance safety, the Addie Beam should only be used when all hard exposed surfaces are protected with proper mats. This minimizes the impact of falls and reduces the risk of injury from contact with hard surfaces around the beam.
Single-User Policy: The equipment is designed for individual use. The manual explicitly states, "DO NOT allow more than one person at a time to use the equipment." This policy prevents collisions, overcrowding, and potential instability of the beam, ensuring a safer training environment for the user.
Instructor Consultation: Users are advised to consult an instructor prior to using the equipment. This initial consultation can help determine appropriate exercises, identify any personal limitations, and ensure the user is ready to begin training on the beam.
Matting Recommendation: Tumbl Trak strongly recommends the use of matting to enhance safety. Various accessory mats, such as the Hopscotch Mat and the Tumbling Mat, are available and designed to provide a softer surface under and around the beam, further reducing the risk of injury from falls. These mats can span the length of the beam and beyond, offering comprehensive protection.
Versatile Training: The Addie Beam is suitable for practicing a wide range of gymnastics skills, including leaps, turns, handstands, and other foundational and intermediate beam elements. Its design supports diverse training needs for gymnasts of varying skill levels.
Comfortable Surface: The beam features a suede-covered surface (Part A), which provides a comfortable and tactile grip. This material helps prevent slipping and allows for more confident execution of skills, mimicking the feel of a competition beam while offering enhanced training benefits.
Stable Support: The beam is supported by two rubber-coated feet (Part B). These feet are designed to provide stability and prevent the beam from shifting during use, ensuring a secure platform for training. The rubber coating also helps protect floor surfaces.

Maintenance Features:

Regular Parts Inspection: Before assembly and subsequent use, users are instructed to "check the parts list to make sure all pieces have arrived in good condition." This initial inspection helps identify any damaged, worn, or missing parts that could compromise the equipment's safety or functionality.
Damaged Parts Policy: The manual explicitly states, "DO NOT use the apparatus with damaged, worn or missing parts." This is a critical safety instruction, emphasizing that any compromised component must be addressed before the beam is used. Using damaged equipment can lead to serious injury.
Secure Assembly: The assembly process involves securely attaching the rubber-coated feet to the beam using screws (Part C) and star washers (Part D), tightened with an Allen Wrench (Part E). Ensuring these connections are "tightly secured" is a key maintenance step to maintain the beam's structural integrity and stability. Regular checks of these connections are implied to prevent loosening over time.
Air Pressure for Inflatable Equipment (General Safety Note): While the Addie Beam itself is not inflatable, the safety instructions include a general note about inflatable equipment: "Assure that all inflatable equipment has sufficient air pressure to avoid injury." This highlights a broader safety principle from Tumbl Trak, indicating a commitment to safety across their product range, and serves as a reminder for users who might also possess other Tumbl Trak products.
Customer Service for Issues: In case of any questions or issues during the assembly process or regarding the condition of the parts, users are encouraged to "call customer service." This provides a direct channel for support and ensures that any problems can be resolved by experts, contributing to the proper maintenance and safe operation of the equipment.