Need help?Do you have a question about the Tunstall Lifeline 4000 and is the answer not in the manual?
Details the four main sections: Common Tasks, Common Installations, Programming Reference, and External Connections.
Explains how Lifeline 4000 interfaces with different types of control centres.
Procedure for carers or staff to notify the control centre upon arrival.
Guides on registering timed and non-timed services provided to residents.
Instructions for registering services using radio triggers or non-timed methods.
Details on how to record the start and end of a timed service.
Explains how ringing volume increases for unanswered calls.
Describes how speech volume is controlled and can be adjusted by the control centre.
Defines local programming and its methods using the unit's keypad.
Discusses programming considerations for units with and without displays.
Explains parameters as configurable values within the Lifeline 4000 unit.
Step-by-step guide to enter the local programming mode on the unit.
Procedure to select a parameter and enter a new value.
How to exit the programming mode after changes are made.
Configures the unique ID for the Lifeline 4000 unit for control centre identification.
Instructions for setting the 24-hour internal clock of the Lifeline 4000.
Details on parameters for entering control centre and personal recipient numbers.
Procedure to register personal radio triggers like Amie and GEM.
Importance of testing triggers and troubleshooting registration failures.
Step-by-step instructions for safely replacing the unit's rechargeable battery.
Considerations for installing sensors for inactivity and intruder detection.
Setup and cancellation procedures for monitoring resident inactivity.
Configuration steps for setting up intruder detection using sensors.
Guidance on integrating smoke and fire alarms with the Lifeline 4000.
Instructions for setting up temperature monitoring using sensors.
Configuration for controlling door locks via the Lifeline 4000's output.
Measures for configuring Lifeline 4000 for witness protection scenarios.
Details on programming the function of each user and advanced feature key.
How to assign functions like fast dial, away, or relay to keys.
Explanation of available key actions: Away, Fast Dial, Intruder, Speaker, etc.
Method for assigning custom text labels to user keys.
Settings to control the cancel button's behavior, including disabling it.
Configuration of warnings for line disconnection and mains failure, and inactivity monitoring.
Parameters for controlling speech output and selecting the language.
Configures periodic announcements to remind users to turn off Away mode.
Explains how the Lifeline 4000 processes incoming radio trigger signals.
Step-by-step guide for registering various types of radio triggers.
Using extension parameters for flexible trigger registration and location coding.
Assigning specific types (e.g., smoke, intruder) to registered triggers.
Utilizing location codes for specific sensor placement in TT92 and BS protocols.
Configuring the hardwired input to function as various trigger types.
Defines actions associated with trigger types: delay, visual indication, call sequence, etc.
Procedure for programming the order and number of retries for alarm calls.
Methods for detecting resident inactivity using stopwatch and clock timers.
Configuration options for inactivity monitoring methods and timing.
Configuring temperature monitoring for home and away states.
Enabling intruder detection, entry/exit tones, and test mode.
Configures the time allowed for arming/disarming the intruder alarm.
Setting the four-digit PIN required to disable the intruder alarm.
Setting up regular calls to the control centre for system checks.
Enabling frequent periodic calls for enhanced security scenarios.
Options to silence announcements at the Lifeline unit and enable call confirmation.
Automatically ends calls after a set period to prevent long-running connections.
Configures calls made during power outages and upon restoration.
Switching between tone and pulse dialling based on exchange compatibility.
Options to disable unit ringing or augmented ringing.
Setting the number of rings before the volume increases.
Allows setting a date for logging or tracking purposes.
Procedure to set the unit's state to Away or Home.
Description of physical input and output terminals on the unit.
Details on connecting and configuring the hardwired input for trigger detection.
Information on connecting and controlling external devices via the output.
General| Brand | Tunstall |
|---|---|
| Model | Lifeline 4000 |
| Category | Emergency Phone |
| Language | English |
To Next Page
