Turbosound Flex Array TFA-600H - LMS Unit DSP Processing: Input Channels; Input Channel Parameters: Gain and Delay

user manual
FLEX ARRAY
FLEX ARRAY user manual
Page 56
DSP processing
Input Channels
Gain
Knob A: Gain, adjustable in 0.2dB steps from –80 dB to +20dB
Delay
Knob A: Delay, adjustable in variable steps from 0 to 400ms
The delay parameter is adjustable in fine steps at low values; the adjustment becomes
progressively coarser as the value increases. The velocity sensitive Parameter Knobs
therefore provide accurate setting of driver offset delays (typically below 10ms) and rapid
setting of longer system alignment delays.