Turbosound iP300 - Technical Specifications; Other Important Information

14 iP300 Quick Start Guide 15
Other important information
1. Register online. Please register your new
MUSIC Group equipment right after you purchase it by visiting
turbosound. com. Registering your purchase using our simple
online form helps us to process your repair claims more
quickly and e ciently. Also, read the terms and conditions of
our warranty, ifapplicable.
2. Malfunction. Should your MUSICGroup Authorized
Reseller not be located in your vicinity, youmay contact the
MUSICGroup Authorized Ful ller for your country listed
under “Support” at turbosound. com. Shouldyour country
not be listed, please check if your problem can be dealt with
by our “OnlineSupport” which may also be found under
“Support” at turbosound. com. Alternatively, please submit an
online warranty claim at turbosound. com BEFORE returning
theproduct.
3. Power Connections. Beforeplugging the unit
into a power socket, pleasemake sure you are using the
correct mains voltage for your particular model. Faultyfuses
must be replaced with fuses of the same typeand rating
withoutexception.
Important information
Technical Speci cations
System
Frequency response
50 Hz – 20 kHz ±3 dB
40 Hz – 20 kHz -10 dB
Nominal dispersion 120° H @ -6 dB points
Maximum SPL 122 dB
Crossover type 2 way, active
Transducers
2 x 6.5" (167 mm) LF driver
4 x 2" (54.2 mm) HF driversr
Limiter Independent high, mid and low frequency
Amplifier
Maximum output power* 600 W
Type
LF: Class-D
HF: Class AB
Protection Short circuit, open circuit, thermal
Amplifier channels 2
Connectors
Input A / B 2 x combo jack / XLR
Sensitivity 4 dBu, nominal
Input impedance 16 kΩ unbalanced, 32 kΩ balanced
Maximum input level +22 dBu
Link output XLR
Mains supply IEC mains connector with integrated powerswitch
†
Controls
Hardware Rotary push-encoder
Software iOS/Android interface via Bluetooth
DSP
Factory EQ presets Positioning, sound mode
Display LCD 128 x 32, blue, backlit
Level Main
Equalisation Bass, middle and treble
Protection Lock-out function for all settings
Input Mixer
Equalisation Bass and treble
Reverb KLARK TEKNIK design
Bluetooth Wireless Technology
Frequency range 2402 MHz ~ 2480 MHz
Channel number 79
Version Bluetooth 4.1 dual mode
Output 8 dBM
Compatibility Supports GATT/A2DP 1.2 profile
Maximum communication range 30 m typical
Connectivity Master-slave: stereo pairing link
Power Supply
Power consumption 80 W @ 1/8 max power
Voltage (fuses)
USA / Canada / Japan 100-120 V~, 50/60 Hz (T 6.3 A H 250 V)
UK / Australia / Europe 220-240 V~, 50/60 Hz (T 3.15 A H 250 V)
Korea / China 220-240 V~, 50/60 Hz (T 3.15 A H 250 V)
Enclosure
Dimensions (H x W x D) 713x 208 x 216 mm (28.1 x 8.2 x 8.5")
Net weight 11.9 kg (26.2 lbs)
Construction Engineering plastic (GXPP)
Finish Semi matt black paint
Grille Powder coated perforated steel
Accessories
— —
*independent of limiters and driver protection circuits