Turbosound TFM-AN Series - Page 6

10 TFM-AN/TFX-AN Series Quick Start Guide 11
Thank you for choosing a Turbosound loudspeaker product for your application. If you would like further information about this or any other Turbosound
product, please visit our website at turbosound.com.
Unpacking the Loudspeaker
After unpacking the unit please check carefully for damage. If damage is found, please notify your supplier at once. You, the consignee, must instigate any claim.
Pleaseretain all packaging in case of futurere-shipment.
Controls
(1) LCD SCREEN displays the current DSP module and parameter settings.
(2) PROCESS button steps through the DSP processing modules.
(3) SETUP button steps through parameters within DSP processing modules.
(4) EXIT button returns to the top-level DSP screen when pressed.
(5) ENTER button saves changes and deactivates Edit mode when pressed.
(6) ENCODER KNOB toggles between Graphic and Edit modes (when pressed) and changes parameter values (when rotated).
(7) AUDIO INPUT combo jack accepts input signals using XLR, balanced ¼" TRS or unbalanced ¼" TS connectors.
(8) AUDIO LINK XLR connector provides an un-processed copy of the AUDIO INPUT signal.
(9) ULTRANET IN RJ45/Neutrik etherCON jack for connection to additional ULTRANET-equipped devices.
(10) ULTRANET THRU sends out unprocessed digital audio from the ULTRANET IN connector to additional ULTRANET-equipped devices.
(11) USB connection enables rmware updates and remote control over parameters via computer. Please visit turbosound.com to download DSP control software for
your computer.
(12) AC LINK OUTPUT (TFM-AN Series only) connects power to other devices using power cables with Neutrik powerCON twist-locking connectors.
(13) POWER switch turns the unit on and o.
(14) AC INPUT (TFM-AN Series only) accepts power connections from power cables tted with Neutrik powerCON twist-locking connectors.
(15) POWER (TFX-AN Series only) connection accepts power from the included IEC cable.
(1) (2) (3) (4) (5) (6)(7) (8) (9) (12) (14)
(10)
(13)(11)
(15)
Networking capability
All TFM-AN/TFX-AN powered loudspeakers oer remote control via USB. The USB connection allows the user to congure and monitor all DSP parameters using
dedicated software for PC.
The DSP rmware can also be updated via the USB connection. Visitturbosound.com for the latest rmware version.
TFM-AN/TFX-AN speakers also oer proprietary ULTRANET networking capabilities through the ULTRANET IN and ULTRANET THRU connections using CAT5 cables with
RJ45 connectors. ULTRANET allows the user to transmit unidirectionally up to 16 independent channels of 24-bit audio throughout the TFM-AN/TFX-AN system, aswell
as other ULTRANET-equipped devices such as digital mixers and personal monitor systems. Upto7devices can be connected in series on a single ULTRANET cable.
MIDAS M32
MIDAS DL16
TFM-AN Series
TFX-AN Series