turck FEN20-4DIP-4DXP - Configure FEN20 IO Data Map

37
V01.00 | 2018/08
7.1.4 Congure FEN20 IO Data Map
 The FEN20-4DIP-4DXP data sheet contains the IO data map of the device which is used to
configure IO channels in the project:
 At “Modbus Slave Channel” tab, click “Add Channel….” button.
 Configure “Channel 0” input data block, starting at address 0x0000 and data size 3 where:
■
Address 0x0000 Input data
■
Address 0x0001 Device status
■
Address 0x0002 IO Diagnostic warning bit