TurMix AX 310 - 1. Overview and Components; Air Vents, Inlet, and Placement; Power Cable and Plug Safety; Blower Unit and Aroma Container

20
21
21
DE
FR
DE
IT
GB
1. Overview At a glance
1. Air vents
– Keep the openings free. Make sure the airflow is
not blocked e.g. by furniture or curtains. Keep at
least 50 cm away from walls, furniture or curtains.
Caution!
– Never fill water through the air vents!
2. Power cable and plug
– Keep dry at all times.
3. Blower unit
4. Air inlet
– Keep the openings free. Make sure the airflow is not
blocked by anything.
5. Aroma container
– Only put a small quantity of aroma essence or
inhalation agent in the aroma container.
Caution! Never put aroma essence directly in the
water tank!
6. Tank filler opening
– Fill with water slowly and carefully.
– Note the maximum water level mark («MAX»; on the
inside).
– Capacity 5 litres.
Caution!
– Use tapwater only, never use mineral water or
softened water!
Never add anything to the water (e.g. aroma
essence)!
Before filling:
– Pull out the power plug.
– Remove the top of the cover with blower unit.
– Empty out the remaining water with residues.
– Rinse out the water tank well.
– Fill only up to the maximum water level mark.
2.
7. Filterelements A52456
– Antibacterially treated filterelements to ensure
hygienic room air.
– Replace filterelements every 2−3 months.
8. Power switch with monitor light
– Blue when switched on.
9. 2-stage power speed selector with LED display:
– «
» High speed for daytime operation (blue LED
display).
– «
» Low speed for nightime operation (green LED
display).
10. Water tank
– Clean the water tank once weekly.
After use
– Turn off the power switch
.
– Pull out the power plug.
– Empty out the remaining water and rinse out the
water tank well.
– Clean and maintain the humidifier weekly to
ensure hygienic trouble-free operation.
9.
8.
1.
4.
7.
5.
6.
7.
3.
10.