Battery －
Red
Black
Brushless
Motor
Electronic Speed Controller
BRUSHLESS MOTOR
For normal start process direction:
Start throttle ,the motor starting
If haven't move
the throttle,the ESC will emit the tone begin to report the function of setted menu
Start transmitters and move the throttle stick to
the bottom position
Connection the ESC to the battery ,a special tone 123.......(ding-ding-ding),that means the connection is ok.
Default:
1. Ding (No brake)
2. Ding-Ding (Medium Timing)
3. Ding-Ding(Medium cut-off threshold)
4. .Ding (Fixed-Wing)
5. Ding (Normal throttle response)
After checking the connection is ok,start transmitters and move the throttle stick to the
bottom position,then the ESC connection the power.
After connection the ESC to the motor,a special tone“♪1 2 3”------ “（ding – ding –
ding）”,that means the self-testing of the ESC is normal.At this moment move the throttle
stick to the top position,the motor can start normally.
If the throttle is still in the bottom position after self-testing is ok ,the ESC will emit the tone
to report the function of seted menu.
ESC emits 5 times "Ding"tone,each time of "Ding" means the match choose with 5
functions menu(please see the concrete function matches function setting form),it can
check whether the function setting form is in accord with the setting or not.
Throttle range setting:
(Attn ! For the first time use or the ESC with other transmitters to use ,it need to re-
throttle range,other time needn't) .
Proposal set throttle range for the first time use ,after finished ,the throttle linear will be
more smoothly..
The method of setting
1 2 3 4 5 6 7
Start transmitters and move the throttle stick to
the top position
Haven't cut off the power,it will continue to enter other functions set(
Connection the ESC to the battery ,a special tone♪123......♪12345(ding-ding-ding) emits,that means the
connection is ok.
"Ding-Ding-Ding",confirm tone of the top position of throttle
2
To Next Page
Loading...
Need help?
General
