Need help?Do you have a question about the Turnigy T6A-V2 and is the answer not in the manual?
Procedure for binding the transmitter and receiver using the match code.
Steps to power on and initiate the system, including receiver LED confirmation.
Correct sequence for powering off the receiver and transmitter.
Instructions on where to download the necessary PC software and driver.
Step-by-step guide for installing the driver and application software.
Guide to launching the software and understanding its interface.
Explains GETUSER for data import and SETTING for port selection.
Details on ENDPOINT, REVERSE, and SUBTRIM adjustments for server control.
Configuration for SWITCH A/B and VR A/B assignments.
Configuration for ARF, MIX functions, and other advanced settings.
Settings for DR, Stick, Throttle Curve, Pitch Curve, and Model Type.
Explains GETUSER for data import and SETTING for port selection.
Details on DR, Stick, Throttle Curve, Pitch Curve, and Model Type settings.
General| Channels | 6 |
|---|---|
| Frequency | 2.4GHz |
| Modulation | GFSK |
| Antenna Length | 26mm |
| Subtrim | Yes |
| Reverse | Yes |
| Model Type | Airplane / Helicopter |
| RF Power | 20 dBm |
| System | AFHDS |
| Battery | 4 x AA (not included) |
To Next Page
