20
Disconnect the existing
flexible hose from your
toilet tank by turning
it clockwise if you’re
looking at the connection
from above. Be prepared
to catch or wipe up some
residual water that might
spill onto the floor.
Screw the existing flexible hose to the bottom of the
Tank Adapter and then screw the top of the Tank Adapter
counterclockwise onto the tank if you’re looking from above.
Make sure the black rubber gasket is inside the top of the
adapter before screwing. Be careful not to overtighten!
Screw the provided
Flexible TUSHY Wave Hose
onto the Tank Adapter’s
side connection. Be careful
not to overtighten!
Connect to the water line
STEP 4
TOILET
TANK
INLET
To Next Page
Loading...