TUSHY Wave - Page 34

34
Removable lid/seat
The TUSHY Wave has a simple slide-on/o lid and seat
for easy removal and cleaning.
To remove the lid: Unlock the lid by lifting it upward
and sliding the lock on the left hinge to the LEFT. Shift the left
side of the lid back. Then slide the lid to the right to detach
from the base.
To replace the lid: With the lid in the open position, slide
the lid hinge pin into the hole on the base. Place the lid
sliding lock (in the open position) behind the left hinge pin
on the base. Slide the lid forward. The base pin will be inside
the sliding lock. Then slide the lock to the right to reattach.
To remove the seat: Unlock the seat by lifting it upward
and sliding the lock on the right hinge to the RIGHT. Shift
the right side of the seat back then close the seat. Slide
the seat to the left while gently raising its right side to detach
from the base.
To replace the seat: With the seat in the closed position, slide
the lid hinge pin into the base. Place the seat sliding lock (in
the open position) behind the right hinge pin on the base.
Slide the seat forward. The base pin will be inside the sliding
lock. Lift the seat up then slide the lock to the left to refasten.
Special functions / features
Lid sliding lock
Seat sliding lock