Page 11
Section Four: How The TSC Works
How it Works
The Tuson Sway Control (TSC)
continuously monitors trailer yaw.
It has a proprietary algorithm
which is used to determine the
difference between quick steering
to avoid a road obstacle (or other
such circumstances) and the rapid
onset of a trailer swaying event.
It measures the angle, travel
distance and speed of the lateral
motion of the trailer (and other
parameters) and uses this
information to quickly intervene
with the application of trailer
brakes.
The processing capability of the
TSC is powerful and rapid.
It captures all the critical elements
of the swaying condition and uses
this information to predict how the
event will proceed without any
driver intervention.
It uses this data to get ahead of
the event by applying the brakes
on the correct side of the trailer, in
a timely manner, with the proper
braking level for the required
duration.
This quickly dampens and brings
the trailer sway under control.
Tuson Sway Control is based on the
same technology used in automotive
vehicle stability systems.
The Tuson Sway Control
applies the trailer
brakes in a manner to
dampen and control a
trailer swaying event.
Ensure the electric brakes are adjusted
and maintained in accordance with the
manufacturer's recommendations in
your owner's manual for proper
operation of the sway control module.
Important
Brake controller
blue wire.
To Next Page
Loading...