Need help?Do you have a question about the Tuxedo FP8K-DX and is the answer not in the manual?
Always lower to locks, keep clear of moving parts, and never work under an unlocked lift.
Read, keep, and ensure all operators understand the manual and responsibilities.
Install on solid, level concrete (min 4-1/4" thick, 3000psi). Avoid asphalt or wood.
Mount power unit, connect hydraulic fittings and hose, and fill reservoir.
Raise lift, check levelness, and adjust lock ladder rod nuts for proper alignment.
Ensure concrete strength (3000 PSI), thickness (4-1/4"), edge distance, and spacing.
Follow drilling depth, hole cleaning, anchor installation, and tightening procedures for secure installation.
Read instructions, avoid hot parts, use undamaged equipment, manage cords, and keep clear of moving parts.
Avoid pinch points, operate safely, do not override controls, use in protected locations.
Ensure only authorized, trained personnel operate the lift.
Adhere to capacity, check area, handle vehicles safely during loading/unloading.
Chock wheels, set brake, center vehicle, check stability, and load carefully.
General| Brand | Tuxedo |
|---|---|
| Model | FP8K-DX |
| Category | Lifting Systems |
| Language | English |
To Next Page
