INSTRUCTION MANUAL
2 Gang ZigBee Dimmer Module
MS-105BZ
INSTALLATION
Warnings:
1.
electrician in acco
Installation must be carried out by a qualified
rdance with local regulations.
2. Keep the device out of the reach of children.
3. Keep the device away from water, damp or hot
environment.
4. Install the device away from strong signal sources
such as microwave oven that may cause signal
interruption resulted in abnormal operation of the
device.
5. Obstruction by concrete wall or metallic
materials may reduce the effective operation
range of the device and should be avoided.
6. Do NOT attempt to disassemble,repair or modify
the device.
Wiring Instructions and Diagrams
1. With switch
52 mm
18 mm
47 mm
Scan the QR code to download Smart Life App, or
you can also search keyword “Smart Life” at App
Store or Googleplay to download App.
iOS App / Android App
APP USER MANUAL
MANUAL OVERRIDE
FAQ
The switch module terminal reserves the access of
Q1: What should I do if I can’t configure the switch
module?
a. Please check whether device is powered on.
b. Make sure your ZigBee gateway is online
c. Whether it’s in good internet conditions.
d. Make sure the password entered in App is correct.
e. Make sure the wiring is correct.
Q2: What device can be connected to this ZigBee
switch module?
Most of your household electrical appliances can be,
such as lamps, laundry machine, coffe maker, etc.
Q3: What happens if the WiFi goes off?
You can still control the device connected to the
switch module with your traditional switch and once
WiFi is active again the devices connected to App
will connect automatically for normal control.
Q4: What should I do if I change the WiFi network or
change the password?
You have to re-connect your Zigbee gateway hub to the
new WiFi network according to the App User Manual.
Q5: How do I reset the device?
Power on/off device 10 times until the beeper on the
module sounds continuously.
manual override function for the end-user to switch on/off .
• Switch on/off for permanent on/off function.
Notes:
1) Both the adjustment on App and switch can be reset
, the last adjustment remains in memory.
2) The App control is synchronized with the
manual switch.
1.Turn off the power supply before carrying out any
electrical installation work.
2. Connect wires according to the wiring diagram.
3. Insert the module into the junction box.
4. Connect the power supply and follow switch module
configuration instructions.
Notes: Put your smartphone close to the switch
sure you have min. 50% Wi-Fi signal.
module when you’re configuring, and make
TECHNICAL SPECIFICATIONS
Mounting Clip
Product type
2 Gang ZigBee Dimmer Module
Wireless Protocol
ZigBee 3.0
Operation temp. -10ºC - +45ºC
Case temp. Tc: +80ºC (Max.)
Operation range ≤200 m
Dims (WxDxH) 52x47x18 mm
IP rating IP20
Warranty 1 years
Voltage 90-250V AC 50/60Hz
Max Power
2*50W 110V / 2*100W 220V
WIRING DIAGRAM
1 2 3 4
5 6 7 8
S
L
L
N
2
S
1
1
L
2
Global international operation Whenever & Wherever
You are,All-in-one Mobile App
Anywhere
APP
Schedule timer Voice control-work
with Google Home
Voice control-work
with Amazon Alexa
Device Sharing
Inhouse local operation
App
APP
Router Voice control Reset Switch
Reset Switch
ZigBee
Mesh
ZigBee Hub
L N
Switch
Switch
2. Without switch
L N
3. With 2 Way switches
L N
2 Way Switches
2 Way Switches
Mounting Clip
To Next Page
Need help?
General
