24
3. You can restore the factory settings through the local mechanical button of the door lock;
long press the settings key for 5 seconds, all the door locks will be deleted, the door lock is
restored to the default state when the factory is just left. Other users can re -add the door
through the app to re -add the door. Lock.
Note: When the door lock is not activated, the experience password "123456" can
be used to experience the unlocking.
1
23
IX. Restore Factory Settings
Click the icon in the upper right corner, find the "Remove Equipment" after entering the
interface, select "Unbutton and Clear Data"
1. When the mobile APP and the door lock are in a Bluetooth connection state, use the
"Remove Device" to set the operation. All the door locks of the door lock will be deleted,
and the door locks are restored to the default state when they first leave the factory.
Other users can re -add the door lock through the app.
2. When the mobile phone does not perform the Bluetooth connection status with the door
lock, the door lock is restored to the factory setting operation at the mobile app, and the
door lock on the door lock is still not affected. Other users can re -match the door locks
through the APP to match the door lock on the back door lock. The original unlocking data
will be invalid.
Version:TY-Z01-24.05-V2.0
To Next Page
Loading...
