Step 3 – PLUG IN AUDIO CORD
Plug the single end of the Audio Cord (4) into the "Audio"
jack located on the back of the transmitter (2). Plug the
other end (RED & BLACK) into the "Audio Out" ports located
on the back of your television set, satellite box, or cable
box. Audio Out ports are labeled "Audio Out" or "Out".
Tips – PLUG IN AUDIO CORD
Tip 1
If you chose to plug the Audio Cord (4) into the back
of your TV, satellite box or cable box and you want TV Ears
to also work with your DVD or VCR, then plug the RED
wire of the Audio Cord (4) into the "Audio Out" of your
satellite or cable box and BLACK wire of the Audio Cord (4)
into the "Audio Out" port on the back of your DVD or VCR.
To Next Page
Loading...
