69
69
Do not use vehicle by shorting the wires without fuse.
This may result in overheating of electrical items / wiring
and may result in fire. Never replace a fuse with a rating
other than that prescribed in order to avoid damage to
the electrical equipment.
Caution
3. Replace the blown fuse with a new one with the
same rating (extra fuse (A) is provided in the fuse
holder itself).
4. Turn ‘ON’ the ignition lock and check for proper
functioning of electrical and ABS system. lncase
if the fuse fails again, consult the nearest TVS
Motor Company Authorised Main Dealer /
Authorised Dealer.
SPARK PLUG
1. Wipe and clean the dust and mud around the
spark plug mounting to avoid their entry inside
the cylinder.
2. Pullout the suppressor cap from spark plug.
3. Remove the spark plug using a plug spanner.
A spark plug with heavy carbon deposits will not
produce strong sparks. Hence, only if necessary,
remove the carbon deposits from the spark plug with
a small wire brush or spark plug cleaning tool.
Inspect the spark plug electrodes (A) and (B) for any
corrosion. If found any replace the spark plug with a
new one.
B
0.7 ~ 0.9 mm
A
A
To Next Page
Loading...
