17
17
HANDLE BAR LEFT SIDE
1. Info switch
Info switch ‘ ‘ is used to cancel an incoming call,
clear notification on cluster display, start / stop of LAP
in lap timer mode, accept / reject the nearest fuel
location suggestion.
2. Horn switch
Press the switch ( ) to blow horn. It is used to
attract the attention of other road users in case of
danger.
3. Turn signal lamp switch
When the turn signal switch is moved to left ’ ‘
or right ‘ ‘, the corresponding turn signal lamps
flashes. To stop flashing, push the switch in.
Connected instrument cluster’s background illumination,
position lamps, headlamp low beam, tail lamp and
number plate lamp glow automatically once the ignition
is turned ‘ON’ without activating any other switch.
When the ignition switch is turned ‘ON’ the connected
instrument cluster performs self diagnostic cycle. A
message ‘GEAR UP’ followed by a ‘Race flag’, ‘Welcome
message’, ‘Ride mode name’ and ‘Average speed details’
will be displayed on the cluster’s display. Wait till the
‘AVG. SPEED’ details appears on the display.
Note
Never attempt to move the vehicle when the steering is
locked, you may lose balance.
Leaving the ignition cum steering lock in ‘ON’ position
for a prolonged time will drain the battery when the
vehicle is not in use. Switch ‘OFF’ and take the control
key out when the vehicle is not in use. Always lock the
steering while parking for safety.
Caution
4 5 6
3 2
1
To Next Page
Loading...
