57
57
FRONT SUSPENSION - ADJUSTMENT
Do not try doing any adjustment while riding as it may
lead to fatal accident.
Do not use any tool or objects to turn the “position
adjuster”. Do it by hand only.
Caution
While adjusting the lever position, ensure the proper
aligning of “position adjuster” number with the arrow
mark on the lever.
Check and ensure the proper free play of both clutch and
front brake after adjusting the lever position.
Note
TVS Apache RTR 200 4V front suspension level can
be adjusted as per your convenience. Adjust the
suspension level as per the load or road conditions.
To adjust the suspension level rotate the knob (A)
either towards ‘H’ (clockwise) or towards ‘S’ (anti-
clockwise) position. Turning the knob towards ‘H’
increases the pre-load which makes suspension
harder and turning the knob towards ‘S’ decreases
the pre-load which makes suspension softer. This
adjustment can be made even using a coin.
To Next Page
Loading...
