45
45
4. On pressing the Set button, if the clock is in
12 hours format, the hour format ‘AM’ or ‘PM’
blinks. Else the clock will be ready for 24 hours
format selection.
5. Press the Mode button to change the hour format
‘AM’ or ‘PM’ or to change the clock to 24 hours
format.
6. If the clock is in 24 hours format press the Mode
button once again to set the clock to 12 hours
format.
7. Press the Set button again so that the hours digit
of the clock blinks.
8. Now, press the Mode button to increase the
hours while hour digits are blinking.
9. On pressing the Set button again the hours of the
clock is set and the minute digit blinks.
10. Now, press the Mode button to increase the
minutes while minute digits are blinking.
11. Press the Set button again to set minutes and to
come out from clock setting.
Bluetooth pairing mode ‘ ‘
Using the Bluetooth pairing mode the connected
instrument cluster of ‘TVS Apache RTR 160’ can
be connected to your Android™ smart phones and
iPhone
®
via Bluetooth
®
through a TVS CONNECT app
which can be download from Google Play and the
Apple store
®
.
If the Set button is pressed when the instrument cluster
is in normal operating mode like ‘ODO’, ‘TRIP’ etc.
following information will be popping out which is not
applicable to present model.
Note
TVS CONNECT
To Next Page
Loading...
