48
On pressing this icon, the app opens a screen
where you will be asked to grant permission to turn
‘ON’ your smart phone’s Bluetooth if it is in ‘OFF’
condition. Turn ‘ON’ the Bluetooth. Else, press the
‘Scan Device’ icon to initiate the search incase the
app is not searching automatically. The app searches
and lists the available clusters. Just select the listed
cluster. The app communicates with the cluster and
the cluster generates a pass key.
Enter this pass key in the app screen to complete the
connection.
For the first time pairing, the connected instrument
cluster should be in ‘BLUETOOTH PAIRING MODE’.
During the course of pairing process, there is any
occurrence of error, the connected instrument cluster
should be turned ‘OFF’ and ‘ON’, and the application also
need to be restarted.
Please remember that, all the smart phones are not
compatible for pairing with the TVS Apache RTR 160
motorcycle’s connected instrument cluster.
During the search of Bluetooth devices in app, if the
vehicle’s connected instrument cluster Bluetooth device
ID is not visible, try for one or two more iterations.
If the phone enters battery saver mode, auto-pairing
might not happen. It takes maximum of five minutes for
auto-pairing and it can happen in vehicle running bellow
10 km/h speed or engine at idling or engine off condition.
To Next Page
Loading...
