50
Customer window
This is the default window when the connected
instrument cluster of your TVS Apache RTR 160 is
connected with your smart phone using Bluetooth
‘ ‘.
Once the cluster is connected with the smart phone,
the cluster displays the signal strength of the network
provider ‘ ‘ and the battery level ‘ ‘ of the smart
phone. Number of unread messages ‘ ‘ and
number of missed calls ‘ ‘.
Incase multiple SIM cards are used in smart phone, by
default, SIM 1’s network provider’s signal strength is
shown in the display of connected instrument cluster.
Signal strength displayed in connected instrument
cluster might vary from the display in smart phone as
the former is referred from telephonic standards.
Incoming call alert display ( )
The connected instrument cluster will display the
incoming calls alerts from the smart phone via
Bluetooth. Ex. ‘AKASH’, will be displayed if the
contact is stored in the smart phone otherwise
number will be displayed. Ex. ‘9897712345’ (in IOS
only “Incoming call” will be displayed).
To Next Page
Loading...
