86
Keep both left and right shock absorbers spring adjusters
in the same position. Adjust step by step. Do not go at a
stretch as it will damage the cam.
During the time of delivery of the motorcycle, the rear
suspension is adjusted to the standard configuration.
REAR SHOCK ABSORBER
TVS Apache RTR 160 is provided with triple rated,
5 step adjustable, monotube inverted gas filled rear
shock absorbers to meet different road and load.
There are 5 notches for adjusting spring load.
If the spring is adjusted to the minimum notch, then
the shock absorber will be softer which is good for
light loads. If the spring is adjusted to maximum
notch then it will be stiffer which is good for heavy
loads.
Adjust the spring pre-load by shifting the adjuster
to the required notch according to the different load
conditions. The more you compress the spring, the
suspension becomes more stiff.
Do not heat / tamper the canister filled with GAS.
SOFT HARD
To Next Page
Loading...
Need help?
General
