90
Tyre puncture
TVS Apache RTR 160 is fitted with a tubeless tyre
on both front and rear wheel. lncase of any puncture
/ tyre damage it is advised to visit nearest tyre
manufacturer Dealer or the tyre repair shops who
knows the repairing methods of tubeless tyre. It is
not necessary to remove the tyre from wheel rim
always to attend the puncture. Even though, if there
is a need of tyre removal, it is strongly recommended
to use a tyre removal / fitment machine.
If at all, tyre levers need to be used, the levers should
be free from sharp edges and care should be taken
not to damage the rim and tyre.
Tyre tread condition
Operating the vehicle with excessively worn tyres
will decrease riding stability and can lead to loss of
control. It is recommended to replace the tyre when
the tyre wears off to the tyre wear indicator level
(indicated by TWI on the tyre).
Tyre rotation direction
While reassembling the tyre, after removing from
wheel rim, ensure that the arrow mark (A) provided
on the tyre, faces the direction of wheel rotation.
* The pneumatic tyres fitted in this vehicle meet the
requirements specified by BIS and comply with the
requirements under the Central Motor Vehicles Rules
(CMVR), 1989.
T
W
I
A
Keep the toner ring upwards whenever the wheel is
removed in order to avoid damage to the toner ring.
Damaged toner ring affects the ABS function.
Warning
Side walls of the tubeless tyres which are in contact with
the wheel rim are only seals the air inside the wheel
assembly. Hence, care should be taken not to damage
the side walls of the tyres during removal / reassembly.
To Next Page
Loading...
