89
89
Replace the brake pads as a set, if the wear indicator
shows beyond the wear limit.
Caution
Lack of maintenance of the brake system increases the
risk of accident. If you notice any malfunction in brake
system contact nearest TVS Motor Company Authorised
Main Dealer / Authorised Dealer.
Brake pad wear indicator
Visually check the brake pads for wear. If the wear is
found beyond the wear indicator groove as shown in
the figure then, replace the brake pads as a set with
a new one.
Wear limit
TYRES*
Tyre pressure:
Check the tyre pressure atleast once in a week if not
more frequently. Insufficient air pressure in the tyres
not only hasten tyre wear, but also seriously affects
the stability of the vehicle.
Under-inflated tyres make smooth cornering difficult
and over-inflated tyres decreases the tyre contact
with the ground which can lead to skidding and loss
of control. Be sure that the tyre pressure is within the
specified limits at all times.
Solo Pillion
Front 1.75 kg/cm² (25 psi) 1.75 kg/cm² (25 psi)
Rear 2.00 kg/cm² (28 psi) 2.25 kg/cm² (32 psi)
The tyre inflation pressure in cold condition and the
tyre thread condition are extremely important for the
performance and safety of the rider. Check the tyres
frequently for inflation pressure as well as the wear
pattern on it. Use of a tyre other than the standard will
cause instability and improper function of ABS.
To Next Page
Loading...
Need help?
General
