TVS RONIN - Taking the Vehicle Out of Storage for Regular Use

102
FRONT WHEEL REMOVAL AND REASSEMBLY
1. Slightly loosen the axle nut (1)
2. Loosen the left side clamping screws (2) and (3).
3. Now, remove the axle nut along with a washer.
4. Support the front wheel and slowly pull out the
quick-release axle (4) from the left side.
5. Place a support below the frame to prevent
vehicle from falling and lift the vehicle up.
6. Carefully dislocate the disc from the caliper
assembly and slide the wheel out.
7. Reverse the procedure for reassembling.
3
1
2
4
Ensure proper seating of disc in the caliper assembly
while reassembling the wheel.
Ensure to re-fix the right spacers at both the sides of
the wheel.
Keep the toner ring upwards whenever the wheel is
removed in order to avoid damages to the toner ring.
Damaged toner ring affects ABS function.
Warning