Use only the brand and type of spark plugs are
recommended.
It is recommended to tighten the spark plug by hand
until the end and then tighten the lock plugs. Do not
be so tight plugs or cross flow aluminum cylinder
heads because the groove will be damaged.
Do not let dirt get into the engine through the spark
plug hole when the plug is removed.
ATTENTION
ENGINE OIL
Checking oil level
Check the engine oil level on a regular basis.
1. Establish vehicle on a flat surface. Remove
the oil size stick, wipe it clean and put in the
hole by dipping.
2. Check the oil level. Oil level should be
between the lower and upper markers as
shown in the picture. If the oil is less than
the lower level, add engine oil of the
recommended brands to the upper level
mark.
Lever checking oil level
maximum
minimum
MAINTENANCE
30
To Next Page
Loading...
