EE / RTN12 switch – A two-position switch selects the direct outputs from the mixer or the return 1
and 2 as a signal source for the monitoring.
Master – The fader sets the gain of both Left and Right legs and has +6 dB of gain in hand with the
nominal 0 dB gain position marked.
PWR LED – A red LED lights to indicate power is on, and blinking when the battery is too low.
Power switch – In position EXT the mixer will be powered by an external DC supply and in BATT by
the internal batteries. Batteries should be recharged with the switch in EXT position.
To Next Page
Loading...