Twister T2 - Page 5

TWISTERTRIMMER.COM
IMPORTANT SAFETY INFORMATION
pg | 3
• Substung factory parts with third-party parts may result in bodily harm or damage
to the T2.
• Keep the T2 well venlated to prevent overheang.
• Safety glasses, dust masks, and ear protecon must be worn when operang the T2.
• Do not wear loose clothing or jewellery when operang or conducng maintenance
on the T2.
• Confine long hair when operang or conducng maintenance on the T2.
• Do not operate or conduct maintenance on the T2 while red or under the influence
of drugs, alcohol, or medicaons.
• Do not remove safety labels from the machine.
Replace any safety labels if they
become damaged or obscured.
Connection & Electrical Safety Information
• The T2 requires a 120V, 20A (North America) or 230V, 10 A (Europe) circuit breaker.
• The T2 must be used in connecon with a properly grounded receptacle. Refer to the
specificaons (see pages 50-51) to determine the correct electrical requirements.
• Observe all applicable building and electrical codes.
• Do not overload outlets or extension cords as this can result in fire or electric shock.
• Do not use extension cords lower than 12 AWG.
• Do not use extension cords longer than 25 (7.5m).
• To power down the T2, switch off the motors via the control panel before unplugging
the machine.
Operation Safety Information
• Ensure the T2 is fully assembled before operaon.
• Do not operate the T2 without the vacuum hose installed.
• Keep visitors and children a safe distance from the T2.
• Never let the T2 run unaended.