4
Safety Instructions
This User Manual is provided for your convenience. Please read this instruction manual
thoroughly before using your new printer, as the precautions, information, and tips
contained within can significantly help you avoid the risk of improper product setup and
usage.
• After unpacking, please follow the instructions to remove the corresponding
fixation of the XYZ axis to prevent damage caused by forced movement of the
machine.
• Confirm whether the voltage gear of the machine is matched before starting the
machine to avoid damage to the machine power supply due to the mismatch of
voltage gear.
• The printer has 110VAC/230VAC and other high voltage power interfaces. Only
use the provided power cord. Use approved power cords and sockets to ensure
they are not damaged.
• Do not place the printer in a location with significant vibration or instability, as
machine shake can affect print quality. It is recommended to place the printer in
a well-ventilated, low-dust environment to prevent overheating.
• Avoid touching the nozzle and hot bed when the printer is working to prevent
high-temperature scalding. After printing, use the residual temperature of the
nozzle to clean the consumables on the nozzle with tools, avoiding direct contact
with hands to prevent scalding.
• When the machine is running, stay away from the operating parts and avoid
inserting fingers or other objects into the inside of the running printer to prevent
injury.
• Adult supervision is essential; ensure that children do not have access to the
machine to prevent personal accidents.
• Perform regular product maintenance: In the event of a power failure, use a dry
cloth to clean the printer body, wipe away dust and bonded printing materials,
and regularly lubricate and maintain the guide rail.
• In case of an emergency, please turn off the power directly.
To Next Page
Loading...
