F3200 Installation & Programming Manual Document No: LT0122
Applications
Page 9-18 5 July 2001 Issue 2.7
Notes
1. The second pole of the relay is used by fitting connectors CN0260, CN0488 to the
holes in the 8RM.
2. If only one sign is used, the diode need not be fitted.
3. Both tones should be disabled in the AVI.
4. If Supervision is not required, the second pole is not required and the AVI +24V
terminal can be wired directly to the Gas Flood +24V terminal.
FIGURE 9.2.6
WIRING MULTIPLE SUPERVISED SYSTEM INOPERATIVE SIGNS
To Next Page
Loading...
