F3200 Installation & Programming Manual Document No: LT0122
Ordering Information
Page 4-4 5 July 2001 Issue 2.7
ORDERING INFORMATION (CONTINUED)
LM0042,LOOM,1888-62,PROG PORT TO 25 PIN SERIAL
(cable to connect printer/computer to Controller, has 25 pin min D)
LM0044,LOOM,1901-81-1,DISPLAY EXTENDER FRC,2M
LM0045,LOOM,1901-81-2,DISPLAY EXTENDER FRC,5M
LM0046,LOOM,1901-81-3,DISPLAY EXTENDER FRC,0.5M
LM0049,LOOM,1901-81-4,DISPLAY EXTENDER FRC,0.25M
LM0053,LOOM,1931-28-1,F3200 20 WAY FRC,300MM
(standard FRC for interconnecting 8 way modules, included in FP0553, 554)
LM0092,LOOM 1901-88 CONTROLLER TO 1ST DISPLAY, FRC, 1.2M
(connects Display Bd to Controller, allows mounting of Display Bd in furthest left position,
included with FZ3031).
LT0119 LITERATURE,1931-17,F3200 OPERATOR'S MANUAL,A4,LOOSE
LT0120 LITERATURE,1931-18,F3200 OPERATOR'S MANUAL,A5
LT0121 LITERATURE,1931-19,F3200 TECHNICAL MANUAL
LT0122 LITERATURE,1931-20,F3200 PROGRAMMING & INSTALLATION MANUAL
LT0130 LITERATURE,1931-32,F3200 PRESENTATION,ACAD12 DISK
LT0133 LITERATURE,1931-46,REMOTE LCD UNIT,OPERATOR MANUAL,A4
LT0135 LITERATURE,1931-52,F3200 ARCHITECTS SPEC,A4
LT0148 LITERATURE,1931-64,RDU INSTALLATION & PROGRAM MANUAL
LT0212 LITERATURE,RDU TO NDU UPGRADE INSTRUCTIONS
ME0060,MECH ASSY,1901-79,RAC CABINET,EXT INNER DOOR
(hinged 7U inner door for mounting Display Bds on, includes screws, perspex window, cage
nuts and pcb standoffs)
ME0063,MECH ASSY,1931-15-1,F3200 4U HINGED CONTROL PANEL
(4U hinged door with keypad and Controller/Display pcb mounted on it).
ME0064,MECH ASSY,1931-15-1,F3200 4U HINGED RDU CONTROL PANEL
(4U hinged door with no-name keypad and RDU Controller/Display mounted on it).
ME0065,MECH ASSY,1931-47,1 ZONE GAS CONTROL 7U DOOR
ME0066,MECH ASSY,1931-47,2 ZONE GAS CONTROL 7U DOOR
ME0067,MECH ASSY,1931-47,3 ZONE GAS CONTROL 7U DOOR
ME0068,MECH ASSY,1931-47,4 ZONE GAS CONTROL 7U DOOR
(ME0065-68 include screened 7U door, field connector and looms for connecting to 8RMS
and 8ZMs, screws and cage nuts - for 1,2,3 or 4 gas zones)
To Next Page
Loading...
