Tyco Software House RM-DCM-2

To Next Page

DATA SHEET

RM-DCM-2

Door Control Module with Enclosure

Features That Make a Difference:

Full-featured local door control module lowers wiring costs

Complete set of inputs and outputs to control one door

Flexible control options for reader LEDs and beep patterns

Easily expandable

Additional internal etch connections support magnetic lock features

and accommodate local bypass switch

Optional LCD provides clear instructions that help simplify

startup and diagnostics

Status LEDs on inputs and outputs for quick troubleshooting

Built-in tamper switch provides secure installation

Plug-in screw terminals reduce installation time

Put a full-featured RM-4E door control module in a UL listed,

tamper-protected enclosure and you have the powerful

Software House

RM-DCM-2. RM-DCM-2 is designed to

support up to two RM-4Es and a choice of up to two I8 input

boards or R8 output boards, providing a single enclosure for

doors with IN and OUT readers.

RM-DCM-2 supports both Wiegand and magnetic stripe

readers and provides additional wiring to magnetic locks

if required.

The RM-4E modules create the connectivity between a reader

and a control panel when third party card readers are used on

a C•CURE

system. In addition, the RM-4E modules provide

two supervised inputs and two SPDT relays (no ARM-1s

are necessary). The LEDs and optional LCD display provide

diagnostics to simplify the installation.

RM-DCM-2 provides standby power with its built-in

uninterruptible power supply (UPS).

With its robust feature set, RM-DCM-2 is designed to handle

the most demanding access control applications with ease

while offering numerous installation and service features that

lower its life cycle cost.

Shown with optional I8 input module,

R8 output module, and battery

Need help?

Do you have a question about the Tyco Software House RM-DCM-2 and is the answer not in the manual?

Summary

RM-DCM-2 Door Control Module Overview

Key Features

Highlights advanced features for efficient door control, including flexible reader options and simplified installation.

Product Description and Application

Details the RM-DCM-2's integration with RM-4E modules for comprehensive access control solutions.

RM-DCM-2 Technical Specifications

Physical, Environmental, and Electrical Details

Covers enclosure dimensions, weight, operating conditions, and power requirements for the module.

Regulatory, Communications, and I;O Specifications

Details compliance standards, communication bus, reader support, inputs, outputs, and tamper detection.

Indicators, Switches, and Mounting

Describes status LEDs, optional LCD, dipswitch functions, and mounting dimensions.