21
User guide Doc. version 1.2
5 Making telephone calls
VL Telephone/VL Telephone plus
5.7 Call number chaining (call-by-call function)
Your telephone provides the option to chain telephone
number segments which are stored under different memory
stations. This is useful e. g. if you want to dial a telephone
number using a specific destination network code (call-by-
call function).
Example: You have stored a telephone number on memory
dialling location 0 and a destination network code on speed
dialling location 2.
Press speed dialling key 2. Wait until the
destination network code has been dialled.
0 Press the P key and numeric key 0 afterwards.
The telephone number is then linked to the
destination network code. The two numbers are
shown in the display and are dialled
sequentially.
5.8 Dialling the telephone number transmitted
by the last incoming call
The ”Transmission of the caller’s telephone number” is a
service provided by the telephone network provider and
possibly has to be applied for and released.
A telephone number transmitted with a call is automatically
stored. You can view the number and dial it.
If there is an unanswered incoming call, ”R” is shown in the
display’s symbol bar. You can then view the telephone
number and will know who had called you. You may then
dial this telephone number directly.
Press the P key.
To Next Page
Loading...