User Manual
MADE IN KOREA
This product is intended for domestic use only.
Keep this user manual handy for easy reference.
Carefully read this User Manual, particularly “all safety warnings.”
■
■
■
pH Chart
How to Measure: Place 10-15 mL of test water in a container
and add 2-3 drops of reagent. Then mix well and check the
color of the water with the pH chart above.
(The color depends on water quality and reagent.)
The user should be responsible for failure or
improper selection or improper use of the
products such as use in any manner for which
the product was not originally intended.
This product is subject to changes that enhance
its performance without prior notification.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
This appliance is not intended for use by persons (including
children) with reduced physical sensory or mental capabilities
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
Children should be supervised to ensure that they do not
play with the appliance.
100-130V
To Next Page
Need help?
General
