L A S E R S F O R M A R K I N G
Maintenance Procedures
Z-Axis Lubrication
The Motor Driven BiSlide Z-Axis should be lubricated with Velmex BL-1 oil a minimum of once
a year. To access the Z-Axis you must remove the right service panel of the Zetalase by
removing the 4 bolts shown below. Remove the side access panel and set aside. See Velmex
lubrication illustration for details on lubricating the Z-Axis below.
Remove 4 Bolts
(Metric Allen Wrench)
Lubricate
Z-Axis
Both Screw
& Rails
Lubrication PN: BL1
Manufacturer: Velmex
Order from TYKMA or direct
Zetalase™
27
General Manual SE 1
To Next Page
Loading...