Tylo T870H - Front Wall Glass and Ceiling Electrical Connections

3PersonInfraredSauna Page12 210121
Rev.2
Front Wall Glass (Box #2):
 Place the Right Side Front / Door panel into the Floor panel slot.
Note: Do not let go of glass panel, it needs to be held in place.
 While carefully still supporting the Front Wall Glass, one person on each side.
 Lower the Ceiling panel onto the Walls & Glass panels.
 Glass panels must recess into the slot in the Ceiling panel.

 Make sure the ceiling fits tight and is flat and level.
 Turn the wood ceiling cam locks to lock the ceiling into place.
Electrical Connections (inside the Ceiling panel-front right side):
 Open all hatch doors on the ceiling to locate the necessary electrical plugs.
 Access the connectors and connect them according to the labels on the harness.
 Connect wire #4 from the Back Wall harness to the Ceiling wire #4.
 Connect wire #5 from the Back Wall harness to the Ceiling wire #5.
 Connect wire #6 from the Back Wall harness to the Ceiling wire #6.
 Connect wire #7 from the Right Wall to the Ceiling Wire #7.