To Next PageTo Next Page
Need help?Do you have a question about the Tylo T870H and is the answer not in the manual?
General| Brand | Tylo |
|---|---|
| Model | T870H |
| Category | Plumbing Product |
| Language | English |
Discusses risks of hyperthermia, fetal damage, and loss of consciousness from prolonged exposure.
Warns against using the sauna for drying, hanging items on heaters, or operating with damaged cords.
Details the need for two adults, required tools like a Phillips screwdriver, and box labeling.
States the sauna requires a 230 Volt AC / 10 Amp circuit breaker, recommending a dedicated circuit.
Instructs users to record model and serial numbers for technical support.
Guides placement of the floor panel, noting heater orientation and power cord positioning.
Details how to install the right and left back wall panels into the floor panel slots.
Covers installing front wood walls and bench skirts, ensuring proper alignment and avoiding wire pinching.
Details installing the bench top and making electrical connections on the left side under the bench.
Completes bench top installation and outlines right side electrical connections under the bench.
Instructs to ensure the control box switch is on and complete right bench top installation.
Guides the installation of the left and right front glass sidelight panels into the floor and wall slots.
Details setting the ceiling panel in place and connecting wire harnesses from the walls to the ceiling.
Covers installing front wall glass, lowering the ceiling, and making electrical connections in the ceiling.
Details rear left ceiling wiring and instructs on plugging in the main power cord.
Provides visual guidance and components for attaching the door handles.
Advises on pre-sauna preparation, duration, hydration, and post-sauna cool-down procedures.
Warns against alcohol, chemicals, and provides guidance on interior and exterior cleaning.
Addresses issues like non-lit control pads, room not heating, and door rubbing/binding.
Illustrates the wiring schematic for the IR sauna, including Bluetooth audio system.
Explains how to start the sauna, set time/temperature, and control lighting options.
Details how to turn the audio system on and operate it via Bluetooth.
Guides users on pairing their mobile device to the sauna's audio system via Bluetooth.
Instructs on downloading the SaunaLogic App and registering for a new user account.
Details logging in, checking Wi-Fi requirements, adding the device, and initiating the IR2 control pairing state.
Guides connecting to the Wi-Fi network and the IR2 Control's hotspot for pairing.
Addresses network unavailable or device not responding errors and naming the paired IR2 control.
Explains how to use the app to turn the sauna on/off and access various control functions.
Provides solutions for not finding the hotspot or connection failures, including clearing memory.
