►
►►
► THROTTLE LEVER (Hand Operated Throttle Lever)
The hand operated throttle lever is located to the right side of
the Lever/Switch panel and controls the speed of the engine.
Move the Throttle Lever to increase or decrease the engine speed.
■
■■
■ To increase the engine speed, Push the lever Upwards.
■
■■
■ To decrease the engine speed, Pull the lever Downwards.
The lever can be left in any position between idle and
maximum as required.
►
►►
► REMOTE HYDRAULIC VALVE LEVERS
Attachment controlled by the Remote levers.
The lever is used when operating a hydraulically operated
implement.
The associated outlets are fitted with female quick release
couplings and are located on the Rear side of the Machine.
Move the hydraulic remote control lever up or down as
the lever is neutral.
■
■■
■ When Connecting or Disconnecting the Couplers to attach the Implement
– Connecting
1.Clean both couplers.
2.Remove dust plugs.
3.Insert the implement coupler to the tractor hydraulic coupler.
4.Pull the implement coupler slightly to make sure couplers
are firmly connected.
– Disconnecting
1.Lower the implement first to the ground to release hydraulic
pressure in the hoses.
2.Clean the couplers.
3.Relieve pressure by moving hydraulic control levers with engine
shut off.Pull the hose straight from the hydraulic coupler to release it.
4.Clean oil and dust from the coupler,then replace the dust plugs.
To Next Page
Loading...
